The roll cutting machine has the function of dividing rolls of the original size into rolls of smaller sizes as required, ensuring the quality and size of raw materials for the next processing process.
With automatic roll cutting machines, we can process a variety of products with the smallest material thickness up to 12mic, cut roll materials or adhesive tape, paper, foam, plastic film…
Material roll diameter up to 800mm, meeting most standard rolls Ready to support customers in cutting rolls and sheets as required Extremely high cutting speed up to 200m/min Processing size accuracy up to ±200mic
Technical data sheet of roll cutting machine
| Machine type | Cutting rewind | Cutting slit |
| Max width input | 1.300mm | 1.300mm |
| Maximum diameter of roll input | 800mm | 220mm |
| Core | 3inc ~ 6inc | 3inc |
| Cut size | 7mm~1.300mm | 5mm~1.300mm |
| Maximum diameter of roll output | 500mm | 220mm |
| Thickness depending on hardness | 12μ ~ 1000μ | ~1mm |
| Blade type | Cut with a mechanical round knife Cut with an air knife Cut with a razor | Cut with a round blade |
| cutting speed | 200mpm | 200~1200RPM |
| feeder speed | 200mpm | 0~900RPM |
| Cutting method | Open the roll to cut and spread | No need to opening roll |
| output core | 3 inch | 3 inch |
| max width out put | 1.300mm | 1.300mm |
| Material type | Film, paper, decals, aluminum film, copper, foam, sponge | Tape |
| Measures to remove dirt | Clean booth | * |
